Description

Hot Sale Standalone Access Controller IP68 Waterproof Touch Keypad

1. Access Controller Features 

Ultra-low Power	Power Standby current is less than 30mA
Wiegand Interface	WG26 Input and output
Searching time	Less than 0.1s after reading card
Backlight keypad	Operate easily at night
Doorbell interface	Support external wired doorbell
Access ways	Card, Pin code, Card & Pin code

2. Access Controller Specifications

Working Voltage：DC12-24V	Standby Current：≤30mA
Card Reading Distance：1～3cm	Capacity：2000 users or pin
Working Temperature：-40℃～ 60℃	Working Humidity：10%～90%
Lock output load：≤3A	Door Relay time：0～99S （Adjustable）
Frequency: EM 125khz / IC 13.56mhz	Waterproof: IP68  ( optional )

3.Access Controller Installation

3.1Remove the back cover from the keypad using the supplied special screw driver

3.2Drill 2 holes on the wall for the Self tapping screws and I hole for the cable

3.3Put the supplied rubber bungs to into the two holes

3.4Fix the back cover firmly on the wall with 2 Self tapping screws

3.5Thread the cable through the cable hole

3.6Attach the keypad to the back cover.

 

 

4. Access Controller Diagram

4.1 Common Power Supply

4.2 Special Power Supply

4.3 Reader Mode

 

 

5. Access Controller Package